Renewable Sales uses Revolutionary Technology to help Contractors with Solar Site Assessments

Posted on by
Reply

Holliston, MA (PRWEB) April 17, 2012

Renewable Sales has invested in a tool for the Solar Contractor which produces a professional project layout, proposal and payback schedule. With the Renewable Sales revolutionary PV Array Designer called Q*Sol (short for Quick Solar Design Tool), the installers client can see exactly how the panels will look and where they will be placed on the roof. The first step is to use the project address to get a satellite image of the project building. The platform technology then allows the installer to map out the solar array on the roof ideally using the southern or southeastern facing angles. A picture is generated so the installer and the client can see how many panels will be needed and how the home will look from the street.

Ideal for residential and commercial applications, The Q*Sol platform can be found on the Renewable Sales American Choice Solar Panels website: http://www.americanchoicesolar.com. There is no project too big or cumbersome for Q*Sol, it can map the array across the flat roof of a building as well as for panels on a mounting system placed on the ground (while allowing the space needed for the angle of the panels).

Q*Sol uses a patent pending Panel Layout Technology that runs “the most sophisticated layout algorithm in the industry.” Instead of the installer trying to determine which panel layout makes the most sense, Q*Sol helps to pick the optimal panel layout. This system not only shows how many and what size panels are needed, but also has a transparency function allowing the installer to make sure there are no obstacles situated below the panels. This program allows an installer to show a prospective buyer how the panels will look in under 3 minutes.

Once the mapping is completed a report is generated detailing all of the paybacks and the incentives that apply to that proposal showing the actual cost of the system once the state rebates and SREC’s are applied. The amount of energy generated versus the amount of electrical energy saved is also highlighted.

The team behind Q*Sol is constantly striving to enhance and improve the platforms capabilities. Many of the upgrades have been in response to questions and suggestions from the renewable companies who use the site. The incredible technology of Q*Sol has to be seen to really be appreciated. says Kevin Price, CEO Renewable Sales.

For a demonstration and more specific information on the Q*Sol Quick Solar Design Tool, go to the American Choice Solar Panels website: http://www.americanchoicesolar.com and click on the Q*Sol Logo (shown to the right) located in the center of the Home Page.

The Q*Sol PV Array Designer tool is powered by ModSolar Platform.





Fujifilm Installs Conergy Solar Panels At Its North Kansas City Facility

Posted on by
Reply

North Kansas City, MO (PRWEB) April 18, 2012

In an effort to bring down costs while keeping its corporate commitment to sustainability,FUJIFILM North America Corporation, Graphic Systems Division has selected Conergys PH 235P panels to install on its North Kansas City, Missouri manufacturing facility. One of the first solar construction projects installed in this part of the metro area, the installation was completed by local clean-energy integrator Brightergy this winter. With 216 modules, the solar installation will produce about 60,000 kWh annually, which is equivalent to taking 600 cars off the road for a year.

With this installation, Fujifilm will realize a substantial cost savings on its current energy usage. In addition, the company will be able to take advantage of the utilities net energy metering program, which will provide ongoing benefits. Globally, Fujifilm has a Greenhouse gas target set at 30% reduction in CO2 emissions by Fiscal Year 2020, as compared to 2005.

Conergy recently supplied its premium module panels at Fujifilms facility in Hawaii last year, and this installation in North Kansas City marks the second solar project for Fujifilm in North America, said Ray Hosoda, President and CEO, FUJIFILM North America Corporation. This solar panel project will help play a role in Fujifilms corporate mission of energy conservation and Greenhouse gas reduction. The combination of Conergys PH-Series modules, along with Brightergys unique efforts to bring us an affordable, clean, and renewable energy solution, will continue to help us make strides toward our energy goals.

The Fujifilm installation is the first project with Brightergy. “Fujifilm’s choice of this location was a good one due to the excellent economic incentives in the state of Missouri, said Susan Brown, principal, Brightergy Solar Solutions. And Conergys PH series panels, matched with our talents and resources as a solar energy integrator, will not only help Fujifilm reach its sustainability goals, but it is a fantastic financial investment for them as well.”

Simone Baeurer, Conergys Regional Account Manager, added, “Fujifilm and Brightergy made a great choice when they selected the Conergy PH 235 module for this installation. The PH module offers an excellent balance of reliability, efficiency and value. The Conergy modules have a long service-life design and are a highly-cost effective solar energy solution – a perfect fit for this commercial application.

About Fujifilm

FUJIFILM North America Corporation, a marketing subsidiary of FUJIFILM Holdings America Corporation, consists of five operating divisions and one subsidiary company. The Imaging Division sells consumer and commercial photographic products and services including film, one-time-use cameras, online photo services and fulfillment, digital printing equipment and service. The Electronic Imaging Division markets consumer digital cameras. The Motion Picture Division provides motion picture film, and the Graphic Systems Division supplies products and services to the printing industry. The Optical Devices Division provides binoculars, and optical lenses for closed circuit television, videography, cinematography, broadcast and industrial markets. FUJIFILM Canada Inc. markets a range of Fujifilm products and services. For more information, please visit http://www.fujifilm.com/northamerica, or go to http://www.twitter.com/fujifilmus to follow Fujifilm on Twitter. To receive news and information direct from Fujifilm via RSS, subscribe at http://www.fujifilmusa.com/rss.

FUJIFILM Holdings Corporation, Tokyo, Japan, brings continuous innovation and leading-edge products to a broad spectrum of industries, including electronic imaging, digital printing equipment, medical systems, life sciences, graphic arts, flat panel display materials, and office products, based on a vast portfolio of digital, optical, fine chemical and thin film coating technologies. The company was among the top 16 companies around the world granted U.S. patents in 2010, and in the year ended March 31, 2011, had global revenues of $ 25.8 billion*. Fujifilm is committed to environmental stewardship and good corporate citizenship. For more information, please visit http://www.fujifilmholdings.com.

At an exchange rate of 86 yen to the dollar.

About Brightergy

Brightergy, one of the nations fastest-growing full-service solar development and finance firms, offers turn-key solar design, installation, monitoring, and in-house financing services. Our extensive experience includes hundreds of projects completed for clients ranging from Fortune 500 companies and utilities, to non-profits and mid-sized businesses from offices in Kansas City, St. Louis, and Boston. We make it simple, rewarding, and profitable to do the right thing. For more information, please visit: http://www.brightergy.com.

About Conergy

As a full system manufacturer, Conergy Group delivers solar energy systems from a single source and offers all services under one roof.

Through deep-rooted operations in 18 countries, Conergy System Sales sells premium Conergy products to customers in nearly 40 countries worldwide. Conergy supports homeowners, installers, wholesalers and investors in their efforts to go solar. With local sales activities on five continents, Conergy has close relationships with all its customers. Listed on the Frankfurt stock exchange, Conergy employs more than 1,500 people worldwide. Since Conergys founding in 1998, it has produced and sold more than 1.6 GW of clean solar power, and developed over 500 MW of solar parks.

Through its acquisition of well-established local companies, Conergy began operating as a distributor and project developer in North America in 2005 and currently has five offices, four warehouses and three production sites in the region. In North America, Conergy is both a manufacturer and wholesaler. Conergy manufactures mounting systems in Sacramento, CA. In Ontario, Canada Conergy produces modules and mounting systems that meet local content requirements for the Provincial FIT. Conergy offers innovative products and tailored services to its North American network of system integrators and project developers. Through these activities, Conergy maintains expert knowledge about local market conditions and requirements. For more information, please visit: http://www.conergy.us.

###

All product and company names herein may be trademarks of their registered owners.





Related Making Solar Panels Press Releases

Proposed ‘Green Deal’ is Met with Scepticism from MPs and Industries

Posted on by
Reply

(PRWEB UK) 18 April 2012

New proposals made by the government last week are set to make it easier for home-owners to save money on their energy bills through having boilers, insulation, double glazing and other eco-friendly features installed, it has claimed.

This new Green Deal drawn up by Andrew Stunell, Liberal Democrat MP for Hazel Grove, will allow home-owners to borrow up to

Earth Day Marks Milestones for Smith & Associates Corporate Sustainability Initiatives

Posted on by
Reply

Houston, TX (PRWEB) April 18, 2012

In celebration of Earth Day, Smith & Associates, the largest independent distributor of electronic components, is announcing results of its corporate green initiatives. In 2011, Smith intensified its commitment to becoming fully sustainable and carbon-neutral. As part of that commitment, Smith elected to participate in Houstons Green Office Challenge. Today, Smith will be showcasing the results of its company-wide initiatives at the citys inaugural Green Office Challenge awards ceremony, hosted by Mayor Annise Parker at Houstons Green Building Resource Center.

Greenovation

In 2011, Smith completed a major renovation of its Houston headquarters. Smith’s “greenovation,” an environmentally based, energy-efficient renovation, included structural and corporate changes. Smith installed a rooftop, solar photovoltaic electric system to provide renewable energy to its headquarters building; a solar thermal system for heating water; and a solar panel-covered parking structure that supplies electric car charging. Other renovations included replacing the buildings previous roof with an energy-efficient cool roof, the installation of energy-efficient, LED and motion sensing lighting, and the installation of advanced rain sensors and sprinkler system scheduling. Since September, within the first sixth months of participating in the Green Office Challenge, Smith has exceeded many of the environmental goals it set for that period, including:

Nokero Releases Ed Solar Book Light for Education Specially Designed for the Worlds Energy-Poor

Posted on by
Reply

Denver, CO (PRWEB) April 19, 2012

The aptly named Ed for Education with a wise personality to match is poised to teach children about the benefits of alternative energy without breaking the bank. With its MSRP of $ 10usd, an intro-price of $ 6usd, and lowest volume pricing of $ 3.95usd, Nokeros inventor and founder, Steve Katsaros, says: This is a great tool for teaching a generation of kids to think about their future and the possibilities of a cleaner and brighter life. Katsaros continues, I have been in so many places like Kenya, Mexico, Rwanda, Pakistan, and have seen firsthand how the lack of lighting affects populations. Nokero has taken a stand and developed this product for those living without electricity. It is our hope that this little light is also accepted by schools and homes throughout the developed world.

Utilizing an effective mixture of solar, LED and battery technology, Katsaros patent-pending design allows for easy recharging and ultra performance. When asked about the charge-to-running performance, Katsaros said: In theory, for every hour of strong-sun charging, Ed will run for ninety minutes. Given this 150% run ratio, kids can study all night long. The following breaks down each component and what makes this ratio possible:

Solar Panel

Ed uses a back-contact solar cell, an ultra efficient photovoltaic technology usually reserved for the most demanding applications, with an efficient cost to match. The grid-less front surface and n-type starting material that does not suffer the initial light-induced degradation of commonly-used p-type wafers allow Eds small size to pack an unprecedented 40mA of charging. The solar panel is packaged in an EVA + PET lamination process to protect it from UV-degradation and water damage.

Battery

With low self-discharge and hi-temperature chemistry, Eds Nickel Metal Hydride (NiMH) battery provides years of use until it is replaced. With low self-discharge, Ed can be stored for a few months without losing significant charge. With the hi-temperature chemistry, Ed can withstand the environmental conditions of equatorial regions of the world where energy poverty is prevalent. Whats more, if the battery needs to be replaced after a few years, it can be replaced with a standard AAA-sized NiMH battery. Eds ecologically friendly battery has no harmful lead, mercury, cadmium or other heavy metals.

LED

The light emitting diode (LED) is ultra efficient and created specifically for long-runtime applications. The LED is driven at such low electrical current, it will provide tens of thousands of hours of use.

Housing

Nokeros inventor chose to minimize the parts in Ed to drive the price as low as possible. The housing is a single part made of durable and UV-resistant ABS plastic, yet incorporates most of Eds features. Although the housing appears to be simple it actually is quite complexoften the more complex something is, the fewer pieces it has.

A worldwide problem:

Approximately a quarter of the worlds population lives without electricity, and hundreds of millions more live with intermittent electricity. Most use kerosene, candles, or make do with no light at all. The problem has become so pervasive that the United Nations has declared 2012 the Year of Sustainable Energy for All.

The Ed is available via Nokeros international distribution partners, which include NGOs, non-profits, for-profits, and humanitarian relief groups. Samples are available online at http://www.nokero.com for $ 6, a sample-only price.

About Nokero

Nokero(short for No Kerosene) was formed in June 2010 to develop safe, affordable and environmentally-friendly technology that eliminates the need for harmful and polluting fuels used around the world. Nokero is a fully-financed, privately held company with offices in Denver, Colorado and Hong Kong.

For more contact:

Steve Katsaros

steve(at)nokero.com

US cell: +1(303)514-1991







More Making Solar Panels Press Releases

Rheem Redesigns Hydronic Air Handler, Debuts More Efficient Version

Posted on by
Reply

Atlanta, GA (PRWEB) April 19, 2012

Rheem today launched a newly redesigned hydronic air handler, which is an important element of the Rheem Integrated Heating & Water Heating System. Now available in the United States and Canada, the updated Rheem Hydronic Air Handler incorporates a new, high-efficiency permanent magnet motor, which helps upgrade the electrical efficiency of the air handler.

Powered by Tankless Technology, the Rheem Integrated Heating & Water Heating System provides a unique and highly efficient way to heat both the air and water in a homewhile also being compatible with Rheem air conditioners and heat pumps. When a Rheem tankless gas water heater is matched with the hydronic air handler, hot water is circulated through the air handler and is then re-circulated back to the tankless water heater. This pairing of products provides a soft, comfortable heat to the home while maintaining comfortable humidity levels regardless of the climate.

In the recent down economy, weve seen savvy mechanical contractors and plumbers identify new avenues for business. The Rheem Integrated Heating & Water Heating System has become a go-to product for mechanical contractors to enter the tankless water heating space and for plumbers to enter the residential heating market, said Sal Brunetto, corporate national accounts manager, Rheem. Now that weve upgraded the efficiency of the Rheem Hydronic Air Handlers motor, timing is ripe for other contractors and plumbers to use this product to expand offerings and, ultimately, increase business.

The redesigned Rheem Hydronic Air Handler is AHRI-certified and can meet ENERGY STAR

One Stop Green Completes 3.86kW Solar PV System in Piney Point, Texas

Posted on by
Reply

Houston, Texas (PRWEB) April 21, 2012

After conducting an initial site survey and identifying the ideal area for a solar photovoltaic system, One Stop Green, an online retailer for energy efficient products and installer of solar photovoltaic systems for residential and commercial properties, has completed the installation of a 3.86kW system, which includes the expansion for additional modules.

Beginning in November of 2011, One Stop Green was contacted by a customer who was interested in making the home he was building in the Piney Point/Memorial area of Texas, entirely green and energy efficient. One Stop Green sent out a sales associate who walked the homeowner through the entire process beginning with a site survey when the home was just beginning to be built. From there, One Stop Green worked with the customer to determine a budget and identify those initiatives that are most important to the customer. Because the home was over 14,000 square feet, the homeowner knew the monthly electricity bills would be through the roof, which is why they focused on a solar photovoltaic system to help mitigate those high electricity costs. The home had just begun its initial construction phase and because solar is so new to the area, this being the first homeowner to install a solar photovoltaic system on their house in this historic part of Houston, the idea was to start small, but allow enough room to eventually grow the system and produce enough energy for the entire home.

After working to prioritize the homeowners needs, One Stop Green developed the plans for a 3.68kW system that would roughly produce nearly 20% of the entire homes energy usage. Because historic consumption rates were not available, it was rather difficult to assume how much energy the solar photovoltaic system will actually offset, but based on surrounding homes, the energy experts at One Stop Green were able to ascertain figures of consumption rates and therefore estimate power production and off set. As panel prices become cheaper and more incentives become available in this area, the homeowner plans to expand their system, which is why One Stop Green installed additional flash mounts so as to prevent unnecessary work associated with installation of more modules. The homeowners were so proud of their new solar pv system and potential to save money on energy bills that they have asked One Stop Green to return once construction is complete to offer additional products such as energy saving LED light bulbs, water saving toilets, faucets, and rain water harvesting systems.

One Stop Green, LLC facilitates environmentally friendly improvements to residential and commercial properties through distribution of green, energy efficient products and services. They offer every product needed for sustainable energy independence enabling homeowners, businesses and commercial property owners to master their usage by reducing waste and implementing efficient energy consumption methods. Their goal is to provide user friendly and practical long-term solutions to existing inefficiencies and their carefully selected products and professional installers offer a higher level of satisfaction and service for their customers.

Contact:

Nathan Kaufman

http://www.OneStopGreen.com

P: 877.449.9110|O: 713.541.2739|C: 210.846.5900

###







Related Making Solar Panels Press Releases